|
|
| Line 1: |
Line 1: |
| | ==Overview== | | ==Overview== |
| − | GnuCash can be built to run more or less natively on OSX -- meaning without X11. | + | GnuCash can be built to run more or less natively on OSX -- meaning without X11. Better yet, the build is almost automatic. |
| | | | |
| − | There are two methods available to compile this Quartz version of GnuCash. One is to use the MacPorts build system with a configuration set to turn off X11 support and turn on Quartz support. That method is pretty much fully automated, and is described on the [[MacOSX/MacPortsDetail]] page.
| + | You can do this also with MacPorts: The details are described at [MacOSX/MacPortsDetail]. If you already have MacPorts installed, you should use that procedure, as gtk-osx doesn't work well with a MacPorts installation. |
| | | | |
| − | The other method is the procedure outlined on this page, which is almost automatic -- you need to apply some patches by hand, whereas MacPorts includes a system to apply similar patches automatically.
| + | If you want to have a clickable GnuCash.app to put in your Applications folder, this is the solution to use. If you want to be able to easily customize your installation, this is also the solution for you. Don't want all of the extra stuff that MacPorts drags in? Well, this might be a bit better... but GnuCash is notorious for its huge list of dependencies. Want to keep up with the latest work from the Gnome developers? This solution gets many of its packages directly from source-code-control... That's a double-edged sword, of course, because if a build gets broken, you're pretty well stuck until the developers for that package fix it. |
| | | | |
| − | Currently (December 2008), the advantage of the procedure outlined on this page is that it includes instructions for creating a Mac-ish ".app" application you can doubleclick to launch. The current MacPorts installation does not create an Application -- you end up with a command you must execute at the shell prompt, which invokes GnuCash. (Once invoked, though, GnuCash should behave identically either way.)
| |
| | | | |
| − | To perform the procedure on this page, you'll need Developer Tools installed. The instructions which follow assume that you're comfortable building programs from the command line and editing text files.
| |
| | | | |
| | I've succeeded in building this under various incarnations of Leopard while perfecting the modulesets, always on a Mac Pro... but it ought to work on any Mac running Tiger or Leopard. | | I've succeeded in building this under various incarnations of Leopard while perfecting the modulesets, always on a Mac Pro... but it ought to work on any Mac running Tiger or Leopard. |
| Line 15: |
Line 13: |
| | | | |
| | ==Preliminaries== | | ==Preliminaries== |
| | + | Tiger or newer is '''''required''''' for gtk-osx. |
| | | | |
| − | Go to http://developer.imendio.com/projects/gtk-macosx/build-instructions and follow the instructions. '''''Don't run jhbuild build yet!'''''
| + | You need Python 2.5 to run jhbuild. This is already part of Leopard (OSX 10.5), but Tiger (10.4) provided Python 2.3, so the gtk-osx maintainer has included logic to make a new python for Tiger users. |
| | | | |
| − | If you have set <tt>$MACOSX_DEPLOYMENT_TARGET</tt> to something other than your running version of OSX, you may get an error during jhbuld bootstrap.
| + | Download http://github.com/jralls/gnucash-on-osx/raw/master/.jhbuildrc-custom into your home directory. |
| | | | |
| − | You may get an error about <tt>$PREFIX/inst/man/man1/cjpeg.1</tt> not existing. What this really means is that install wasn't set to make the directory, so select '[4] start shell" and mkdir -p $PREFIX/inst/man/man1, quit the shell, and select '[1] rerun stage install'.
| + | Note that by default, jhbuild will put everything into your home directory. I prefer to build and install into /usr/local, so you'll find commented out settings to do it that way at the top of .jhbuildrc-custom. You can uncomment these and change them to whatever you like -- or leave them as they are. |
| | | | |
| − | Paste the code from [[#Customize jhbuildrc]] into a file named ".jhbuildrc-custom" in your home folder.
| + | Go to http://live.gnome.org/GTK%2B/OSX/BuildInstructions and follow the instructions. '''''Don't run jhbuild build yet!''''' |
| − | Do likewise for [[#Gnucash Moduleset]], with a filename "gnucash.modules", also in your home directory.
| |
| | | | |
| − | ==Building==
| + | At the moment, in order to build gtk-doc (which is required by a bunch of packages), you need python bindings for libxml2. For Leopard users, if you don't have this installed somewhere on your $PYTHONPATH, and for all Tiger users, run |
| | | | |
| − | Once all of the preliminaries are complete, do:
| |
| | <tt> | | <tt> |
| − | $> jhbuild build | + | $> jhbuild buildone libxml-py |
| | </tt> | | </tt> |
| | | | |
| − | You'll get a few errors:
| + | If you have set <tt>$MACOSX_DEPLOYMENT_TARGET</tt> to something other than your running version of OSX, you may get an error during jhbuld bootstrap or later when building targets. |
| | | | |
| − | '''libgnomeprint''' has a defective configure.ac which fails when libm isn't found. I've filed a bug report (Bug 540837) with a patch, but a similar bug report (Bug 471730) has been sitting for a year, so there's no telling when the developers will get around to fixing this (and libgnomeprint is deprecated anyway). Here's the patch:
| + | ==Building== |
| | | | |
| − | <pre>
| + | Once all of the preliminaries are complete, run: |
| − | --- configure.in 2008-07-03 14:18:44.000000000 -0700
| |
| − | +++ configure.in.mod 2008-07-03 14:17:11.000000000 -0700
| |
| − | @@ -148,9 +148,17 @@
| |
| − | dnl Checking for libm
| |
| − | dnl =================================
| |
| − | AC_CHECK_LIBM
| |
| − | -if test "x$LIBM" = "x"; then
| |
| − | - AC_MSG_ERROR(You need -lm(mathematic library) for this version of libgnomeprint.)
| |
| − | -fi
| |
| − | +case $host in
| |
| − | +*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
| |
| − | + # These system don't have libm, or don't need it
| |
| − | + ;;
| |
| − | +*)
| |
| − | + if test "x$LIBM" = "x"; then
| |
| − | + AC_MSG_ERROR(You need -lm(mathematic library) for this version of
| |
| − | +libgnomeprint.)
| |
| − | + fi
| |
| − | + ;;
| |
| − | +esac
| |
| − | LDFLAGS="$LDFLAGS $LIBM"
| |
| − |
| |
| − | dnl =================================
| |
| − | </pre>
| |
| | | | |
| − | Select '[4] start shell', apply the patch (you probably will need to use <tt>patch -l</tt>) , quit the shell, and select "[6] go to stage configure"
| + | <tt> |
| | + | $> jhbuild build |
| | + | </tt> |
| | | | |
| − | '''libtasn1''' the download has been moved to a new location. You will need to download and unpack the tarball manually in order to continue. Select '[4] start shell' and:
| |
| − | <pre>
| |
| − | $> curl -L ftp://ftp.gnu.org/pub/gnu/gnutls/libtasn1-1.4.tar.gz -o /usr/local/src/gnome/pkgs/libtasn1-1.4.tar.gz
| |
| − | $> gunzip -dc "/usr/local/src/gnome/pkgs/libtasn1-1.4.tar.gz" | tar xf -
| |
| − | </pre>
| |
| | | | |
| − | '''goffice''' will complain about a misconfiguration of gtk-doc. It doesn't matter, so select "[2] ignore error".
| |
| | | | |
| − | '''libgnomeui''' Another configure.in bug (Bug 535958). The patch:
| + | ==Running from the commandline== |
| − | <pre>
| |
| − | Index: configure.in
| |
| − | =================================================================== | |
| − | --- configure.in (revision 5608)
| |
| − | +++ configure.in (working copy)
| |
| − | @@ -116,7 +116,7 @@
| |
| − | gnome_keyring_requirement="gnome-keyring-1 >= gnome_keyring_required_version"
| |
| − | GNOME_KEYRING="gnome-keyring-1"
| |
| | | | |
| − | - if test x$GNOME_HAVE_X11 != xyes ; then
| + | Now you're ready to try it out: |
| − | + if test x$have_x != xdisabled && test x$GNOME_HAVE_X11 != xyes ; then
| |
| − | AC_MSG_ERROR([libX11 not found])
| |
| − | fi
| |
| − | ;;
| |
| | | | |
| − | | + | <tt> |
| − | </pre>
| + | $> $PREFIX/bin/gnucash |
| − | | + | </tt> |
| − | Select "[4] start shell", apply the patch, quit the shell, and select "[1] rerun configure"
| |
| − | | |
| − | '''slib''' will fail because it wants to install to /usr/local, and you'd have to be building with root authority for that to work. We don't want to install there anyway, so select "[4] start shell" and:
| |
| − | <pre> | |
| − | $> mkdir $PREFIX/lib/slib
| |
| − | $> cp *.scm $PREFIX/lib/slib/
| |
| − | $> cp guile.init $PREFIX/lib/slib
| |
| − | $> cd $PREFIX/share/guile/1.6/
| |
| − | $> ln -s ../../../lib/slib .
| |
| − | $> $PREFIX/bin/guile | |
| − | guile> (use-modules (ice-9 slib))
| |
| − | guile> (require 'new-catalog)
| |
| − | guile> (quit)
| |
| − | </pre>
| |
| − | Quit the shell and select "[2] ignore error and continue to done".
| |
| − | | |
| − | You'll have to stop the build (control-c will do it) after the gnucash tarball unpacks to apply the following patch. '''''Make sure to do it before configure finishes!'''''
| |
| − | Select "[4] start shell", apply the patch, exit the shell, and select "[1]" rerun configure'''.
| |
| − | | |
| − | Here's the patch:
| |
| − | <pre>
| |
| − | --- configure~ 2008-12-13 19:41:47.000000000 -0800
| |
| − | +++ configure 2008-12-21 13:45:40.000000000 -0800
| |
| − | @@ -24157,7 +24157,7 @@
| |
| − | # These are unavailable on windows/mingw32
| |
| − |
| |
| − |
| |
| − | -for ac_header in X11/Xlib.h glob.h
| |
| − | +for ac_header in glob.h
| |
| − | do
| |
| − | as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
| |
| − | if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
| |
| − | </pre> | |
| | | | |
| | ==Making a Bundle== | | ==Making a Bundle== |
| | So far so good, but you don't really want to have to open a Terminal window every time you want to use GnuCash, now do you? Of course not. You want a nice icon in your Applications folder (and maybe in the Dock) to click on when you run GnuCash. Here's how to do this: | | So far so good, but you don't really want to have to open a Terminal window every time you want to use GnuCash, now do you? Of course not. You want a nice icon in your Applications folder (and maybe in the Dock) to click on when you run GnuCash. Here's how to do this: |
| | | | |
| − | :Install the bundler from http://developer.imendio.com/projects/gtk-macosx/creating-app-bundles. | + | :Download the bundler from http://github.com/jralls/gnucash-on-osx/raw/master/ige-mac-bundler.tar.gz, unpack it, cd into the ige-mac-bundler directory, and <tt>make install</tt> |
| − | :I like to create a subfolder called gnucash-bundler and keep everything in there, but you don't have to. | + | :Download http://github.com/jralls/gnucash-on-osx/raw/master/gnucash-bundler.tar.gz and unpack it. |
| − | :Paste the contents of [[#GnuCash Bundle Description]] into a file called "gnucash.bundle", [[#Gnucash Info.Plist]] into "Info.Plist", and [[#Gnucash Start Script (Bundler)]] into "gnucash-launcher", all in the same folder. | + | :<tt>cd gnucash-bundler</tt> |
| − | :Edit all three files to adjust the paths so that they match your installation.
| + | :Look through gnucash-launcher and gnucash.bundle and adjust the paths to match your installation. |
| − | :You'll need to create gnucash.icns using IconComposer (it's in /Developer/Applications) and the gnucash icons in gnucash's src/pixmaps directory and save it into $PREFIX/share/gnucash/pixmaps/.
| |
| | :make gnucash-launcher executable (<tt>chmod +x gnucash-launcher</tt>) | | :make gnucash-launcher executable (<tt>chmod +x gnucash-launcher</tt>) |
| | :execute <tt>jhbuild shell</tt> to set up the environment for the bundler | | :execute <tt>jhbuild shell</tt> to set up the environment for the bundler |
| − | :For reasons which escape me, I sometimes have to set the path: <tt>export PATH=$PATH:$PREFIX/bin</tt>
| |
| | :while in the shell, execute <tt> ige-mac-bundler gnucash.bundle</tt>. | | :while in the shell, execute <tt> ige-mac-bundler gnucash.bundle</tt>. |
| | | | |
| | And your bundle should be ready to go. | | And your bundle should be ready to go. |
| | Try <tt>GnuCash.app/Contents/MacOSX/GnuCash</tt> from the command-line so that you can see any error messages. If that works, try <tt>open GnuCash.app</tt>. If that works, then you can move GnuCash.app to your Applications folder and it's ready to use. '''''Don't move or remove the installation directory (~/gtk/inst by default): Both dbus and GnuCash have links pointing into it which can't at present be changed.''''' | | Try <tt>GnuCash.app/Contents/MacOSX/GnuCash</tt> from the command-line so that you can see any error messages. If that works, try <tt>open GnuCash.app</tt>. If that works, then you can move GnuCash.app to your Applications folder and it's ready to use. '''''Don't move or remove the installation directory (~/gtk/inst by default): Both dbus and GnuCash have links pointing into it which can't at present be changed.''''' |
| − |
| |
| − | And your bundle should be ready to go.
| |
| − | Try <tt>GnuCash.app/Contents/MacOSX/GnuCash</tt> from the command-line so that you can see any error messages. If that works, try <tt>open GnuCash.app</tt>. If that works, then you can move GnuCash.app to your Applications folder and it's ready to use. '''''Don't move or remove the installation directory (~/gtk/inst by default): Both dbus and GnuCash have links pointing into it which can't at present be changed.'''''
| |
| − |
| |
| − | ==Files==
| |
| − | ===Customize jhbuildrc===
| |
| − | Paste this into .jhbuildrc-custom in your home folder:
| |
| − | <pre>
| |
| − | # -*- mode: python -*-
| |
| − |
| |
| − | #You can override the build and install directories by uncommenting
| |
| − | #and editing the next two lines. Be sure to create these directories
| |
| − | #and change their ownership to you before you try to build!
| |
| − | #checkoutroot = '/usr/local/src/gnome'
| |
| − | #prefix = '/usr/local/gtk'
| |
| − |
| |
| − | autogenargs='--disable-static --enable-shared --disable-gtk-doc --disable-docs --disable-scrollkeeper --disable-xlib'
| |
| − |
| |
| − | module_autogenargs={}
| |
| − | module_autogenargs["gconf"]="--enable-static --enable-shared --disable-scrollkeeper --disable-xlib"
| |
| − | module_autogenargs["libofx"]="--with-opensp-includes=" + prefix + "/include/OpenSP --with-opensp-libs=" + prefix + "/lib"
| |
| − | module_autogenargs["libgnomeui"]="--disable-static --enable-shared --disable-scrollkeeper --disable-xlib --without-x"
| |
| − |
| |
| − | module_makeargs = {}
| |
| − | module_makeargs["perl-xml-parser"]="EXPATLIBPATH=" + prefix + "/lib EXPATINCPATH=${prefix}/include "
| |
| − |
| |
| − |
| |
| − | path = prefix + '/bin/install-check'
| |
| − | if os.path.exists(path):
| |
| − | os.environ['INSTALL'] = path
| |
| − | #Comment this out if you want to build with your default sdk; make a
| |
| − | #similar function (it's in .jhbuildrc) if you want to set a different
| |
| − | #sdk altogether.
| |
| − | #setup_sdk_10_4()
| |
| − |
| |
| − |
| |
| − | moduleset = os.path.expanduser("~/gnucash.modules")
| |
| − |
| |
| − | modules = ['meta-gtk-osx-bootstrap', 'meta-gtk-osx-core', 'meta-gtk-osx-freetype', 'gnucash']
| |
| − |
| |
| − | build_policy = "updated-deps"
| |
| − | </pre>
| |
| − |
| |
| − | ===Gnucash Moduleset===
| |
| − | Paste the following into a file named gnucash.modules in your home folder:
| |
| − | <pre>
| |
| − | <?xml version="1.0" encoding="utf-8"?>
| |
| − | <!DOCTYPE moduleset SYSTEM "moduleset.dtd">
| |
| − | <?xml-stylesheet type="text/xsl" href="moduleset.xsl"?>
| |
| − | <moduleset>
| |
| − | <repository type="svn" name="svn.gnome.org" default="yes"
| |
| − | href="http://svn.gnome.org/svn/"/>
| |
| − | <repository type="tarball" name="kernel.org"
| |
| − | href="http://www.kernel.org/pub/linux/"/>
| |
| − | <repository type='tarball' name='ftp.gnu.org'
| |
| − | href="ftp://ftp.gnu.org/gnu/"/>
| |
| − | <repository type='tarball' name='sourceforge'
| |
| − | href="http://downloads.sourceforge.net/"/>
| |
| − | <repository type="cvs" name="slib.savannah.gnu.org"
| |
| − | cvsroot=":pserver:anonymous@cvs.savannah.gnu.org:/sources/slib"
| |
| − | password=""/>
| |
| − | <repository type="tarball" name="gnucash.org"
| |
| − | href="http://www.gnucash.org/pub/gnucash/sources/stable/"/>
| |
| − |
| |
| − |
| |
| − |
| |
| − | <include
| |
| − | href="http://people.imendio.com/richard/gtk-osx-build/modulesets/gtk-osx.modules"/>
| |
| − |
| |
| − |
| |
| − | <tarball id='readline' autogen-sh='configure'>
| |
| − | <source href='ftp://ftp.gnu.org/gnu/readline/readline-5.2.tar.gz'/>
| |
| − | <patches>
| |
| − | <patch file='ftp://ftp.gnu.org/gnu/readline/readline-5.2-patches/readline52-001' strip='2' />
| |
| − | <patch file='ftp://ftp.gnu.org/gnu/readline/readline-5.2-patches/readline52-002' strip='2' />
| |
| − | <patch file='ftp://ftp.gnu.org/gnu/readline/readline-5.2-patches/readline52-003' strip='2' />
| |
| − | <patch file='ftp://ftp.gnu.org/gnu/readline/readline-5.2-patches/readline52-004' strip='2' />
| |
| − | <patch file='ftp://ftp.gnu.org/gnu/readline/readline-5.2-patches/readline52-005' strip='2' />
| |
| − | <patch file='ftp://ftp.gnu.org/gnu/readline/readline-5.2-patches/readline52-006' strip='2' />
| |
| − | <patch file='ftp://ftp.gnu.org/gnu/readline/readline-5.2-patches/readline52-007' strip='2' />
| |
| − | <patch file='ftp://ftp.gnu.org/gnu/readline/readline-5.2-patches/readline52-008' strip='2' />
| |
| − | <patch file='ftp://ftp.gnu.org/gnu/readline/readline-5.2-patches/readline52-009' strip='2' />
| |
| − | <patch file='ftp://ftp.gnu.org/gnu/readline/readline-5.2-patches/readline52-010' strip='2' />
| |
| − | <patch file='ftp://ftp.gnu.org/gnu/readline/readline-5.2-patches/readline52-011' strip='2' />
| |
| − | <patch file='ftp://ftp.gnu.org/gnu/readline/readline-5.2-patches/readline52-012' strip='2' />
| |
| − | </patches>
| |
| − | </tarball>
| |
| − |
| |
| − | <autotools id="OpenSP" autogen-sh='configure'
| |
| − | autogenargs="--disable-static --enable-shared --disable-doc-build">
| |
| − | <branch repo="sourceforge" module="openjade/OpenSP-1.5.2.tar.gz"
| |
| − | version='1.5.2'/>>
| |
| − | </autotools>
| |
| − |
| |
| − | <autotools id="libofx" autogen-sh='configure'>
| |
| − | <branch repo="sourceforge" module="libofx/libofx-0.9.0.tar.gz"
| |
| − | version='0.9.0'/>
| |
| − | <dependencies>
| |
| − | <dep package='guile-1.6'/>
| |
| − | <dep package="OpenSP"/>
| |
| − | </dependencies>
| |
| − | </autotools>
| |
| − |
| |
| − | <autotools id="guile-1.6" autogen-sh="configure"
| |
| − | autogenargs="--disable-static --enable-shared
| |
| − | --disable-scrollkeeper --disable-xlib">
| |
| − | <branch repo="ftp.gnu.org" module="guile/guile-1.6.8.tar.gz"
| |
| − | version="1.6.7" size="3114052" />
| |
| − | <dependencies>
| |
| − | <dep package='readline'/>
| |
| − | </dependencies>
| |
| − | </autotools>
| |
| − |
| |
| − | <autotools id="Slib" skip-autogen="true">
| |
| − | <branch repo="slib.savannah.gnu.org"
| |
| − | module="slib"/>
| |
| − | <dependencies>
| |
| − | <dep package="guile-1.6"/>
| |
| − | </dependencies>
| |
| − | </autotools>
| |
| − |
| |
| − | <autotools id="gnucash" autogen-sh="configure"
| |
| − | autogenargs="--enable-ofx">
| |
| − | <branch module="gnucash-2.2.8.tar.gz" version="2.2.8"
| |
| − | repo="gnucash.org"/>
| |
| − |
| |
| − | <dependencies>
| |
| − | <dep package="goffice"/>
| |
| − | <dep package="libofx"/>
| |
| − | <dep package="gtkhtml"/>
| |
| − | <dep package="Slib"/>
| |
| − | </dependencies>
| |
| − |
| |
| − | </autotools>
| |
| − |
| |
| − | </moduleset>
| |
| − | </pre>
| |
| − |
| |
| − | ===GnuCash Start Script (commandline)===
| |
| − | Replace $PREFIX/bin/gnucash with this:
| |
| − | <pre>
| |
| − | export PREFIX="~/gtk/inst/" #You'll have to fix this up if you changed it
| |
| − | export PATH="$PREFIX/bin:${PATH}"
| |
| − | export XDG_CONFIG_DIRS=$PREFIX/etc/xdg
| |
| − | export XDG_DATA_DIRS=$PREFIX/share
| |
| − |
| |
| − | GUILE_WARN_DEPRECATED="no"
| |
| − | export GUILE_WARN_DEPRECATED
| |
| − |
| |
| − | if test -z "$DBUS_SESSION_BUS_ADDRESS"; then
| |
| − | eval `dbus-launch --sh-syntax --exit-with-session --config-file=$PREFIX/etc/dbus-1/session.conf`
| |
| − | fi
| |
| − |
| |
| − | GNC_MODULE_PATH="$PREFIX/lib/gnucash:${GNC_MODULE_PATH}"
| |
| − |
| |
| − | EXTRA_PATH="${EXTRA_PATH}:$PREFIX/share/gnucash/guile-modules"
| |
| − | EXTRA_PATH="${EXTRA_PATH}:$PREFIX/share/gnucash/scm"
| |
| − | GUILE_LOAD_PATH="${EXTRA_PATH}:${GUILE_LOAD_PATH}"
| |
| − |
| |
| − | EXTRA_LIBS="${GNC_MODULE_PATH}"
| |
| − | EXTRA_LIBS="${EXTRA_LIBS}:/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/"
| |
| − | EXTRA_LIBS="${EXTRA_LIBS}:$PREFIX/lib"
| |
| − | EXTRA_LIBS="${EXTRA_LIBS}:$PREFIX/lib/gnucash"
| |
| − |
| |
| − | LD_LIBRARY_PATH="${EXTRA_LIBS}:${LD_LIBRARY_PATH}"
| |
| − | DYLD_LIBRARY_PATH="${EXTRA_LIBS}:${DYLD_LIBRARY_PATH}"
| |
| − |
| |
| − | export GNC_MODULE_PATH
| |
| − | export GUILE_LOAD_PATH
| |
| − | export LD_LIBRARY_PATH
| |
| − | export DYLD_LIBRARY_PATH
| |
| − |
| |
| − | exec gnucash-bin "$@"
| |
| − | </pre>
| |
| − | ===Gnucash Start Script (Bundler)===
| |
| − | If you're going to use the bundler, paste this file into your bundle directory named gnucash-launcher; to run from the command line, put this in $PREFIX/bin/gnucash.
| |
| − | <pre>
| |
| − | #!/bin/sh
| |
| − | #We need to point to our original install directory, so define $PREFIX.
| |
| − | #Don't forget to fix this for your own installation!
| |
| − |
| |
| − | export PREFIX=~/gtk/inst
| |
| − |
| |
| − | if test "x$IGE_DEBUG_LAUNCHER" != x; then
| |
| − | set -x
| |
| − | fi
| |
| − |
| |
| − | if test "x$IGE_DEBUG_GDB" != x; then
| |
| − | EXEC="gdb --args"
| |
| − | else
| |
| − | EXEC=exec
| |
| − | fi
| |
| − |
| |
| − | name="`basename $0`"
| |
| − | tmp="`pwd`/$0"
| |
| − | tmp=`dirname "$tmp"`
| |
| − | tmp=`dirname "$tmp"`
| |
| − | bundle=`dirname "$tmp"`
| |
| − | bundle_contents="$bundle"/Contents
| |
| − | bundle_res="$bundle_contents"/Resources
| |
| − | bundle_lib="$bundle_res"/lib
| |
| − | bundle_bin="$bundle_res"/bin
| |
| − | bundle_data="$bundle_res"/share
| |
| − | bundle_etc="$bundle_res"/etc
| |
| − |
| |
| − | export DYLD_LIBRARY_PATH="$bundle_lib"
| |
| − | export XDG_CONFIG_DIRS="$bundle_etc"/xdg
| |
| − | #This has to point back to $PREFIX because of hard-coded paths and the fact that binreloc works only
| |
| − | #with Linux:
| |
| − | export XDG_DATA_DIRS=$PREFIX/share
| |
| − | export GTK_DATA_PREFIX="$bundle_data"
| |
| − | export GTK_EXE_PREFIX="$bundle_res"
| |
| − | export GTK_PATH="$bundle_res"
| |
| − |
| |
| − | export GTK2_RC_FILES="$bundle_etc/gtk-2.0/gtkrc"
| |
| − | export GTK_IM_MODULE_FILE="$bundle_etc/gtk-2.0/gtk.immodules"
| |
| − | export GDK_PIXBUF_MODULE_FILE="$bundle_etc/gtk-2.0/gdk-pixbuf.loaders"
| |
| − | export PANGO_RC_FILE="$bundle_etc/pango/pangorc"
| |
| − |
| |
| − | # We need a UTF-8 locale.
| |
| − | export LANG="`grep \`defaults read .GlobalPreferences AppleCollationOrder 2>&1\`_ /usr/share/locale/locale.alias | tail -n1 | sed 's/\./ /' | awk '{print $2}'`.UTF-8"
| |
| − |
| |
| − | if test -f "$bundle_lib/charset.alias"; then
| |
| − | export CHARSETALIASDIR="$bundle_lib"
| |
| − | fi
| |
| − |
| |
| − | # Extra arguments can be added in environment.sh.
| |
| − | EXTRA_ARGS="--config-path $bundle_etc/gnucash --share-path $bundle_data/gnucash --debug"
| |
| − |
| |
| − | if test -f "$bundle_res/environment.sh"; then
| |
| − | source "$bundle_res/environment.sh"
| |
| − | fi
| |
| − |
| |
| − | # Strip out the argument added by the OS.
| |
| − | if [ x`echo "x$1" | sed -e "s/^x-psn_.*//"` == x ]; then
| |
| − | shift 1
| |
| − | fi
| |
| − |
| |
| − | PFX=${bundle_res}
| |
| − | export PFX
| |
| − | PATH="${PFX}/bin:${PATH}"
| |
| − | export PATH
| |
| − |
| |
| − | GUILE_WARN_DEPRECATED="no"
| |
| − | export GUILE_WARN_DEPRECATED
| |
| − |
| |
| − | if test -z "$DBUS_SESSION_BUS_ADDRESS"; then
| |
| − | eval `dbus-launch --sh-syntax --exit-with-session --config-file=$bundle_res/etc/dbus-1/session.conf`
| |
| − | fi
| |
| − |
| |
| − | GNC_MODULE_PATH="${PFX}/lib/gnucash:${GNC_MODULE_PATH}"
| |
| − |
| |
| − | EXTRA_PATH="${EXTRA_PATH}:${PFX}/share/gnucash/guile-modules"
| |
| − | EXTRA_PATH="${EXTRA_PATH}:${PFX}/share/gnucash/scm"
| |
| − | GUILE_LOAD_PATH="${EXTRA_PATH}:${GUILE_LOAD_PATH}"
| |
| − |
| |
| − | EXTRA_LIBS="${GNC_MODULE_PATH}"
| |
| − | EXTRA_LIBS="${EXTRA_LIBS}:/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ImageIO.framework/Versions/A/Resources/"
| |
| − | EXTRA_LIBS="${EXTRA_LIBS}:${PFX}/lib"
| |
| − | EXTRA_LIBS="${EXTRA_LIBS}:${PFX}/lib/gnucash"
| |
| − |
| |
| − | LD_LIBRARY_PATH="${LD_LIBRARY_PATH}:${EXTRA_LIBS}:"
| |
| − | DYLD_LIBRARY_PATH="${DYLD_LIBRARY_PATH}:${EXTRA_LIBS}"
| |
| − |
| |
| − | export GNC_MODULE_PATH
| |
| − | export GUILE_LOAD_PATH
| |
| − | export LD_LIBRARY_PATH
| |
| − | export DYLD_LIBRARY_PATH
| |
| − |
| |
| − | $EXEC "$bundle_contents/MacOS/$name-bin" $* $EXTRA_ARGS
| |
| − | </pre>
| |
| − |
| |
| − | ===GnuCash Info.Plist===
| |
| − | This is the Info.Plist required of all App Bundles. Paste into "Info.Plist" in the bundle directory.
| |
| − | <pre>
| |
| − | <?xml version="1.0" encoding="UTF-8"?>
| |
| − | <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
| |
| − | <plist version="1.0">
| |
| − | <dict>
| |
| − | <key>CFBundleDevelopmentRegion</key>
| |
| − | <string>English</string>
| |
| − | <key>CFBundleExecutable</key>
| |
| − | <string>GnuCash</string>
| |
| − | <key>CFBundleGetInfoString</key>
| |
| − | <string>GnuCash version 2.2.8 © 2008 Free Software Foundation</string>
| |
| − | <key>CFBundleIconFile</key>
| |
| − | <string>gnucash.icns</string>
| |
| − | <key>CFBundleIdentifier</key>
| |
| − | <string>org.gnucash.GnuCash</string>
| |
| − | <key>CFBundleInfoDictionaryVersion</key>
| |
| − | <string>6.0</string>
| |
| − | <key>CFBundleLongVersionString</key>
| |
| − | <string>2.2.8 © 2008 Free Software Foundation</string>
| |
| − | <key>CFBundleName</key>
| |
| − | <string>GnuCash</string>
| |
| − | <key>CFBundlePackageType</key>
| |
| − | <string>APPL</string>
| |
| − | <key>CFBundleShortVersionString</key>
| |
| − | <string>2.2.8</string>
| |
| − | <key>CFBundleSignature</key>
| |
| − | <string>????</string>
| |
| − | <key>CFBundleVersion</key>
| |
| − | <string>2.2.8</string>
| |
| − | <key>CSResourcesFileMapped</key>
| |
| − | <true/>
| |
| − | <key>LSRequiresCarbon</key>
| |
| − | <true/>
| |
| − | <key>NSHumanReadableCopyright</key>
| |
| − | <string>Copyright 2008 Free Software Foundation</string>
| |
| − | </dict>
| |
| − | </plist>
| |
| − |
| |
| − | </pre>
| |
| − |
| |
| − |
| |
| − | ===GnuCash Bundle Description===
| |
| − | This one configures the bundler to create the app bundle. Paste it into the bundler directory and name it 'gnucash.bundle':
| |
| − | <pre>
| |
| − | <?xml version="1.0" standalone="no"?> <!--*- mode: xml -*-->
| |
| − | <app-bundle>
| |
| − |
| |
| − | <meta>
| |
| − | <!-- Where to pick up the GTK+ installation, icon themes,
| |
| − | etc. Note that "${env:PREFIX}" is evaluated to the value of
| |
| − | the environment variable PREFIX, and likewise with HOME. You
| |
| − | can define additional prefixes and refer to them in paths
| |
| − | throughout this file on the form "${prefix:name}". This is
| |
| − | useful for installing certain libraries or even the
| |
| − | application itself separately.
| |
| − | -->
| |
| − | <prefix name="default">${env:PREFIX}</prefix>
| |
| − |
| |
| − | <!-- The project directory is the default location of the created
| |
| − | app. If you leave out the path, the current directory is
| |
| − | used.
| |
| − | -->
| |
| − | <destination overwrite="yes">${env:HOME}/gnucash-bundler</destination>
| |
| − |
| |
| − | <image>
| |
| − | <!-- Not implemented yet (DMG image). -->
| |
| − | </image>
| |
| − | <run-install-name-tool/>
| |
| − |
| |
| − | <!-- Optionally specify a launcher script to use. If the
| |
| − | application sets up everything needed itself, like
| |
| − | environment variable, linker paths, etc, a launcher script is
| |
| − | not needed. If the source path is left out, the default
| |
| − | script will be used.
| |
| − | -->
| |
| − | <launcher-script>${project}/gnucash-launcher</launcher-script>
| |
| − |
| |
| − | <!-- Not implemented: Optional runtime, could be python or mono
| |
| − | for example.
| |
| − | -->
| |
| − | <!--runtime copy="yes">/usr/bin/python</runtime-->
| |
| − | </meta>
| |
| − |
| |
| − | <!-- The special macro "${project}" refers to the directory where
| |
| − | this bundle file is located. The application name and bundle
| |
| − | identifier are taken from the plist file.
| |
| − | -->
| |
| − | <plist>${project}/Info.plist</plist>
| |
| − |
| |
| − | <main-binary>${prefix}/bin/gnucash-bin</main-binary>
| |
| − |
| |
| − | <!-- Copy in GTK+ and Pango modules. Note the use of the
| |
| − | "${pkg:module:variable}" macro, which evaluates to a pkg-config
| |
| − | variable in the specified module. Note that any libraries that
| |
| − | binaries link to are also copied in automatically.
| |
| − | -->
| |
| − | <binary>
| |
| − | ${prefix}/lib/gtk-2.0/${pkg:gtk+-2.0:gtk_binary_version}/loaders/*.so
| |
| − | </binary>
| |
| − | <binary>
| |
| − | ${prefix}/lib/pango/${pkg:pango:pango_module_version}/modules/pango-basic-fc.so
| |
| − | </binary>
| |
| − |
| |
| − | <binary>
| |
| − | ${prefix}/lib/GConf/2/*.so
| |
| − | </binary>
| |
| − |
| |
| − | <binary>
| |
| − | ${prefix}/lib/gnucash
| |
| − | </binary>
| |
| − | <binary>
| |
| − | ${prefix}/libexec
| |
| − | </binary>
| |
| − |
| |
| − | <binary>
| |
| − | ${prefix}/bin/dbus-launch
| |
| − | </binary>
| |
| − |
| |
| − | <binary>
| |
| − | ${prefix}/bin/dbus-daemon
| |
| − | </binary>
| |
| − |
| |
| − | <binary>
| |
| − | ${prefix}/bin/gnc-*
| |
| − | </binary>
| |
| − |
| |
| − |
| |
| − | <!-- Data to copy in, usually Glade/UI files, images, sounds files
| |
| − | etc. The destination inside the bundle can be specified if the
| |
| − | files should end up at a different location, by using the
| |
| − | "dest" property. The destination must then start with the macro
| |
| − | "${bundle}", which refers to the bundle root directory.
| |
| − | -->
| |
| − | <data>
| |
| − | ${prefix}/share/gnucash
| |
| − | </data>
| |
| − |
| |
| − | <data>
| |
| − | ${prefix}/share/mime
| |
| − | </data>
| |
| − |
| |
| − | <data>
| |
| − | ${prefix}/share/guile
| |
| − | </data>
| |
| − |
| |
| − | <data>
| |
| − | ${prefix}/share/gnome
| |
| − | </data>
| |
| − |
| |
| − | <!--data dest="${bundle}/Contents/Resources/slib"-->
| |
| − | <data>
| |
| − | ${prefix}/lib/slib
| |
| − | </data>
| |
| − |
| |
| − | <data dest="${bundle}/Contents/Resources">
| |
| − | ${prefix}/share/gnucash/pixmaps/gnucash.icns
| |
| − | </data>
| |
| − |
| |
| − | <data dest='${bundle}/Contents/Resources/lib/'>
| |
| − | ${prefix}/lib/*.la
| |
| − | </data>
| |
| − |
| |
| − | <data dest='${bundle}/Contents/Resources/var/lib/dbus/machine-id'>
| |
| − | ${prefix}/var/lib/dbus/machine-id
| |
| − | </data>
| |
| − |
| |
| − | <data dest='${bundle}/Contents/Resources/etc/dbus-1/'>
| |
| − | ${prefix}/etc/dbus-1/
| |
| − | </data>
| |
| − |
| |
| − |
| |
| − | <!-- Icon themes to copy. The "icons" property can be either of
| |
| − | "auto", "all", or "none". All or none should be
| |
| − | self-explanatory, while auto means that the script will try to
| |
| − | figure out which icons are needed. This is done by getting all
| |
| − | the strings from all copied binaries, and matching them against
| |
| − | icon names. To be safe, you should use "all". "none" is useful
| |
| − | if you want just the index.theme file but no icons, mostly
| |
| − | needed for the "hicolor" base theme.
| |
| − | -->
| |
| − | <!-- icon-theme icons="auto"/>
| |
| − | Tango
| |
| − | </icon-theme -->
| |
| − |
| |
| − | </app-bundle>
| |
| − | </pre>
| |
GnuCash can be built to run more or less natively on OSX -- meaning without X11. Better yet, the build is almost automatic.
You can do this also with MacPorts: The details are described at [MacOSX/MacPortsDetail]. If you already have MacPorts installed, you should use that procedure, as gtk-osx doesn't work well with a MacPorts installation.
If you want to have a clickable GnuCash.app to put in your Applications folder, this is the solution to use. If you want to be able to easily customize your installation, this is also the solution for you. Don't want all of the extra stuff that MacPorts drags in? Well, this might be a bit better... but GnuCash is notorious for its huge list of dependencies. Want to keep up with the latest work from the Gnome developers? This solution gets many of its packages directly from source-code-control... That's a double-edged sword, of course, because if a build gets broken, you're pretty well stuck until the developers for that package fix it.
I've succeeded in building this under various incarnations of Leopard while perfecting the modulesets, always on a Mac Pro... but it ought to work on any Mac running Tiger or Leopard.
The default configuration builds in your home folder. On my system, I build in /usr/local/src/gnome and install to /usr/local/gtk. If you want to do that, uncomment the checkoutroot and prefix lines in .jhbuildrc-custom, then create the folders up front and give yourself ownership. If you don't know how to do that, then you should probably leave it the way it is.
You need Python 2.5 to run jhbuild. This is already part of Leopard (OSX 10.5), but Tiger (10.4) provided Python 2.3, so the gtk-osx maintainer has included logic to make a new python for Tiger users.
Note that by default, jhbuild will put everything into your home directory. I prefer to build and install into /usr/local, so you'll find commented out settings to do it that way at the top of .jhbuildrc-custom. You can uncomment these and change them to whatever you like -- or leave them as they are.
At the moment, in order to build gtk-doc (which is required by a bunch of packages), you need python bindings for libxml2. For Leopard users, if you don't have this installed somewhere on your $PYTHONPATH, and for all Tiger users, run
So far so good, but you don't really want to have to open a Terminal window every time you want to use GnuCash, now do you? Of course not. You want a nice icon in your Applications folder (and maybe in the Dock) to click on when you run GnuCash. Here's how to do this:
